Hydraulic Gear Pump 705-41-08070 for Excavator PC15-3/PC10-7/PC20-7
Minor Diameter [Max: |
45.0 LB |
Major Diameter [Min: |
Flange Mount |
Shaft Dia.: |
Left Hand (CCW) |
Shaft Length: |
2520VQ21A8-11BC20L |
Manufacturer Part No.: |
2.5 |
Controlled Flow Rate: |
Flange |
Shaft End Pressure [Max: |
N/A |
Port Orientation - Shaft End: |
Standard Pilot |
PDF |
|
Product Details
Minor Diameter [Max |
45.0 LB |
Major Diameter [Min |
Flange Mount |
Shaft Dia. |
Left Hand (CCW) |
Shaft Length |
2520VQ21A8-11BC20L |
Manufacturer Part No. |
2.5 |
Controlled Flow Rate |
Flange |
Shaft End Pressure [Max |
N/A |
Port Orientation - Shaft End |
Standard Pilot |
Pilot Type |
0.875 in |
Shaft End RPM [Max |
13 Tooth Splined |
Shaft Key |
2520VQ |
Rotation |
1 3/8 in |
Mounting |
Double |
Relief Valve Setting |
Buna-N |
Minor Diameter [Min |
2500 |
Spline Description |
0.715 in |
Pressure Port Size, Cover End |
SAE B, 2 Bolt |
Pressure Port Size, Shaft End |
Single Shaft Seal |
Minor Diameter |
16/32 |
Cover End Flow @ RPM |
2700 |
Port Orientation - Cover End |
2500 |
Max. RPM [Max |
N/A |
Cover End RPM [Max |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Shaft Seal Type |
0.873 in |
Port Type |
0.872 in |
Pump Series |
N/A |
Port Size |
N/A |
Mounting Flange |
N/A |
Seal Material |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) |
4.1 |
Cover End Pressure [Max |
3000 |
GPM @ 1,800 rpm, Cover End |
3000 |
Shaft End Flow @ RPM |
12 |
Major Diameter [Max |
31.5 |
Shaft Type |
w/o Integral Valves |
Weight |
Outlet 45° CW from Inlet |
Displacement Cover End (cu in/revolution) |
Outlet 90° CCW from Inlet |
Integral Valve Configuration |
3/4 in Flange |
GPM @ 1,800 rpm, Shaft End |
1 in Flange |
Model No. |
1.7 |