Hydraulic Gear Oil Pump 705-11-32530 for Bulldozer D61
| Spline Description: |
75.0 LB |
| Shaft Length: |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Max. RPM [Max: |
3520VQ30A8-11AB20 |
| Pump Series: |
3 |
| Port Orientation - Shaft End: |
Flange |
| Relief Valve Setting: |
N/A |
| Displacement Shaft End (cu in/revolution): |
Standard Pilot |
| PDF |
|
Product Details
| Spline Description |
75.0 LB |
| Shaft Length |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Max. RPM [Max |
3520VQ30A8-11AB20 |
| Pump Series |
3 |
| Port Orientation - Shaft End |
Flange |
| Relief Valve Setting |
N/A |
| Displacement Shaft End (cu in/revolution) |
Standard Pilot |
| Weight |
1.25 in |
| Port Orientation - Cover End |
14 Tooth Splined |
| Seal Material |
3520VQ |
| Shaft End Pressure [Max |
1.9375 in |
| Shaft End RPM [Max |
Buna-N |
| Major Diameter [Max |
2500 |
| Mounting Flange |
1.04 in |
| Cover End Flow @ RPM |
SAE C, 2 Bolt |
| Minor Diameter |
Single Shaft Seal |
| Major Diameter [Min |
12/24 |
| Shaft Type |
2500 |
| Pressure Port Size, Shaft End |
2500 |
| Shaft Seal Type |
N/A |
| Shaft Key |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Minor Diameter [Min |
1.248 in |
| Shaft Dia. |
1.247 in |
| Cover End RPM [Max |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Integral Valve Configuration |
N/A |
| Minor Diameter [Max |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
3520VQ30A8-11AB20 |
| Pilot Type |
3000 |
| Manufacturer Part No. |
3000 |
| Port Size |
12 |
| Pressure Port Size, Cover End |
45 |
| Rotation |
w/o Integral Valves |
| Controlled Flow Rate |
Outlet 45° CCW from Inlet |
| Mounting |
Outlet Opposite Inlet |
| Model No. |
3/4 in Flange |
| Shaft End Flow @ RPM |
1 1/4 in Flange |
| GPM @ 1,800 rpm, Cover End |
1.67 |
| Cover End Pressure [Max |
5.96 |