Low Noise Yuken PV2R14 PV2R41 Double Hydraulic Vane Pump For Cutting
| Spline Description: |
18.0 LB |
| Pump Series: |
Flange Mount |
| Shaft End Pressure [Max: |
Right Hand (CW) |
| Integral Valve Configuration: |
7 gal/min @ 1200 rpm |
| Minor Diameter: |
1.25 |
| Minor Diameter [Max: |
NPT |
| Shaft End RPM [Max: |
3/16 in |
| Relief Valve Setting: |
11 |
| PDF |
|
Product Details
| Spline Description |
18.0 LB |
| Pump Series |
Flange Mount |
| Shaft End Pressure [Max |
Right Hand (CW) |
| Integral Valve Configuration |
7 gal/min @ 1200 rpm |
| Minor Diameter |
1.25 |
| Minor Diameter [Max |
NPT |
| Shaft End RPM [Max |
3/16 in |
| Relief Valve Setting |
11 |
| Shaft Type |
7 gpm @ 1200 rpm |
| Pressure Port Size, Shaft End |
0.75 in |
| Controlled Flow Rate |
Straight w/ Key |
| Seal Material |
11 / 1800 |
| Cover End Pressure [Max |
V20 |
| Mounting |
2.66 in |
| Minor Diameter [Min |
Double |
| Shaft Dia. |
3/4 in NPT |
| Cover End RPM [Max |
Viton |
| Displacement Shaft End (cu in/revolution) |
3000 |
| Cover End Flow @ RPM |
2500 psi |
| Max. RPM [Max |
10 1/2 |
| Pilot Type |
P |
| Major Diameter [Max |
SAE A, 2 Bolt |
| Port Size |
P |
| Shaft End Flow @ RPM |
1 |
| Major Diameter [Min |
Inline w/ Inlet |
| GPM @ 1,800 rpm, Shaft End |
1.4 |
| Port Type |
w/o Integral Valves |
| Weight |
1C |