4T9378 Replace Cat Cartridge Kit fits Tractor D10N; D10R; 58L; 59L; 59N;
| Rotation: |
76.0 LB |
| Shaft Key: |
Flange Mount |
| Controlled Flow Rate: |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: |
3525VQ38A17-11AA20-LH |
| Cover End RPM [Max: |
3 |
| Weight: |
Flange |
| Pressure Port Size, Shaft End: |
N/A |
| Mounting Flange: |
Standard Pilot |
| PDF |
|
Product Details
| Rotation |
76.0 LB |
| Shaft Key |
Flange Mount |
| Controlled Flow Rate |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End |
3525VQ38A17-11AA20-LH |
| Cover End RPM [Max |
3 |
| Weight |
Flange |
| Pressure Port Size, Shaft End |
N/A |
| Mounting Flange |
Standard Pilot |
| Pump Series |
1.25 in |
| Displacement Cover End (cu in/revolution) |
14 Tooth Splined |
| Manufacturer Part No. |
3525VQ |
| GPM @ 1,800 rpm, Shaft End |
1 15/16 in |
| Max. RPM [Max |
Buna-N |
| Shaft End Pressure [Max |
2400 |
| Spline Description |
1.04 in |
| Port Size |
SAE C, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Major Diameter [Min |
12/24 |
| Minor Diameter [Min |
2500 |
| Shaft Dia. |
2400 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Pilot Type |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
1.248 in |
| Shaft Length |
1.247 in |
| Model No. |
N/A |
| Port Orientation - Shaft End |
N/A |
| Cover End Flow @ RPM |
N/A |
| Shaft End Flow @ RPM |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter |
3525VQ38A17-11AA20-LH |
| Integral Valve Configuration |
3000 |
| Shaft Seal Type |
3000 |
| Seal Material |
25.5 |
| Cover End Pressure [Max |
57 |
| Mounting |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Pressure Port Size, Cover End |
Outlet Opposite Inlet |
| Port Type |
1 in Flange |
| Major Diameter [Max |
1 1/4 in Flange |
| Relief Valve Setting |
3.37 |
| Shaft Type |
7.42 |